OLED printing on bottle

Flexible OLED panels open up new opportunities for product packaging

Bright eye-catching packaging helps products stand out on the shelf. With OLED lighting, products can stand out even more and have the potential to add even more features to product packaging. In the case of the Lyteus bottle label, a flexible OLED panel embedded in the paper label lights up to show the logo.

Lyteus_Bottle with OLED printed label
copyright Lyteus_Bottle with OLED printed label

The Lyteus label features a rectangular OLED panel integrated into the label, which shines through a printed cut-out in the paper label to display the logo. However, the OLEDs can be printed to produce any shape or colour. And highlighting the product brand or catching the attention of passing shoppers is just one possible application. They could also be used to highlight specific product details, such as a drink’s flavour or colour, or to provide additional information.

Integrating sensors into the packaging further extends the possible uses, opening up a whole new range of opportunities. For example, the package could light up only when touched or when the product was opened, the OLEDs could flash in time to music or light up to warn that the contents were hot.

The OLED panels are incredibly thin, just 330 µm thick, making them ideal for embedding into paper labels. They are also very flexible, so can be easily bent for curved objects like a bottle or cup. Currently, production of the OLED labels is based on a sheet-to-sheet process. For mass manufacturing for labels, the process needs to be scaled up to be able to produce large numbers of labels consistently. Therefore, Holst Centre is developing a roll-to-roll pilot production process to address the challenges of producing OLED labels in large quantities.

“We are seeing a lot of interest from the packaging market for OLED labels”, said Erno Langedijk, Business Development & Program Manager at Holst Centre. “Currently we are working towards the launch of a roll-to-roll pilot line for OLED labels, which will be needed by the industry to print the necessary volumes of labels for mass production.”

Holst Centre is also working to further develop the technology for labels. For example, the current implementation still needs wires and a cell battery. These could be replaced in the future with flat, flexible batteries or even flexible wireless charging coils. And it may eventually be possible to integrate flexible OLED displays, providing even more possibilities for attracting and informing customers about products.

For manufacturers interested in the technology, Holst Centre offers three test kits. The Starter kit includes some sample basic OLEDs panels, the Standard kit includes a wider range of shapes and colours, and the Premium kit is customized to the customer’s specific needs with OLEDs in any shape or colour.

15-meter roll-to-roll device is world’s longest OLED

Working within the framework of Lyteus, Holst Centre and Fraunhofer FEP step into the spotlight with the creation of the world’s longest single-device OLED.  At a stunning 15 meters in length it opens the door to ‘endless OLEDs’ that manufacturers and designers can then easily tailor to their own needs.

European pilot line

Lyteus brings together leaders in OLED technology from across Europe to create a pilot production line and product development services for OLED products. Working together, Holst Centre and Fraunhofer FEP successfully demonstrated the possibility for continuous production of OLEDs of any length. This both reduces the cost of production and enables “cut-to-fit” lighting for applications such as transportation, architecture and interior design.

“This is a major milestone in the development of pilot line Roll-to-roll (R2R) technologies that will enable Lyteus to offer long OLED strips to its customers. It is an example of how the Lyteus pilot line turns flexible OLED possibilities into products. It was only possible due to the unique capabilities of Holst Centre and Fraunhofer FEP and the great cooperation between them and other Lyteus partners” says Pavel Kudlacek, Leader of Technology Development at Lyteus.

Unique OLED structure

It is the first OLED source produced using a unique R2R process that combines the performance of an evaporated OLED stack with solution processing of auxiliary layers. Moreover, the combination improves the process reliability and enables fabrication of devices of any length.

To produce the device, Fraunhofer FEP deposited an indium-tin oxide (ITO) anode onto a protective multi-layer barrier film produced by Holst Centre. The roll was processed at Holst Centre, where slot-die coating was used to structure the anode and deposit the first layer of the OLED stack. Fraunhofer FEP then evaporated the rest of the OLED layers and finalized the devices by lamination of Holst Centre barrier. The resulting devices have a good homogeneity and an efficacy of 15 lumen/W at a light output of 1000 cd/m2.

 

“Roll-to-roll production promises higher volumes and lower costs for flexible electronics applications like OLEDs. At Holst Centre we have been developing a unique solution coating roll-to-roll line for 10 years. The 15-meter OLED shows that the technology is now ready for industrialization, and can deliver cost-effective, high-volume OLED production,” says Pim Groen, Program Manager at Holst Centre.

“The 15-meter OLED is further evidence of our ability to deposit high-quality organic layers and integrate them with solution-processed layers to create reliable and homogeneous devices in a continuous process. It is a step towards the creation of ‘endless’ OLED devices and a further step in our R2R OLED manufacturing processes, which we are developing now for more than 10 years,” says Jacqueline Hauptmann, Project Manager OLED R2R at Fraunhofer FEP.

Visit us at the IDTechEX show –

Lyteus r2r OLED

Santa Clara USA – November 14-15, 2018

Lyteus Shows Flexible OLED Technology for Vehicles

In-car HUD shows power of flexible, transparent OLED lighting technology.

Source: Printed Electronics
May 25, 2018

When designing a vehicle, manufacturers need to ensure drivers can receive essential information without unnecessarily distracting them from the road ahead. At SID Display Week, Lyteus demonstrated how flexible OLED technology makes this possible through a revolutionary automotive heads-up display (HUD). Built on a thin plastic substrate, this transparent display can be integrated into the vehicle’s windshield to add driver-friendly functionality without adding weight. It can be fully customized during manufacture with segments of any shape and color.

The demonstrator features a transparent, multi-color segmented display based on OLEDs. By producing the OLEDs on a thin plastic substrate, Lyteus has produced what it believes is the first transparent and highly bendable automotive HUD to reach pilot production. The OLED-on-plastic approach also enables a display that is extremely light and thin and provides complete design freedom.

The HUD demonstrator was produced on the Lyteus pilot line, a pan-European initiative funded via the European Union’s Horizon 2020 Research and Innovation Programme. A unique resource for companies looking to explore the potential of flexible OLEDs, the Lyteus pilot line allows manufacturers to start developing new OLED-enhanced products today without waiting for OLED technology to enter mass market. It offers sheet-to-sheet fabrication up to 20 cm x 20 cm, and a 30-cm roll-to-roll line is due to come online later this summer.

“The automotive HUD demonstrator shows how flexible OLED technology can change our lives, in this case potentially making driving safer and more user friendly. The Lyteus line exists to help innovative ideas like this get to market faster in areas such as automotive, aerospace and health. We offer large-scale pilot production of bendable OLEDs in any shape and color, transparent or reflective, and with a uniformity that surpasses any other light source,” said Erno Langendijk, program manager at Holst Centre, one of the Lyteus coordinating partners.

Revolutionary in-car HUD shows power of flexible, transparent OLED lighting technology

Revolutionary in-car HUD shows power of flexible, transparent OLED lighting technology

When designing a vehicle, manufacturers need to ensure drivers can receive essential information without unnecessarily distracting them from the road ahead. At this year’s SID Display Week, Lyteus will demonstrate how flexible OLED technology makes this possible through a revolutionary automotive heads-up display (HUD). Built on a thin plastic substrate, this transparent display can be integrated into the vehicle’s windshield to add driver-friendly functionality without adding weight. Moreover, it can be fully customised during manufacture with segments of any shape and color.

The demonstrator features a transparent, multi-color segmented display based on OLEDs – a novel light source that emit over an entire surface, allowing designers to create completely new lighting and display effects. By producing the OLEDs on a thin plastic substrate, Lyteus has produced what it believes is the first transparent and highly bendable automotive HUD to reach pilot production. The OLED-on-plastic approach also enables a display that is extremely light and thin, and provides complete design freedom.

The HUD demonstrator was produced on the Lyteus pilot line, a pan-European initiative funded via the European Union’s Horizon 2020 Research and Innovation Programme. A unique resource for companies looking to explore the potential of flexible OLEDs, the Lyteus pilot line allows manufacturers to start developing new OLED-enhanced products today without waiting for OLED technology to enter mass market. It offers sheet-to-sheet fabrication up to 20 cm x 20 cm, and a 30-cm roll-to-roll line is due to come online later this summer.

“The automotive HUD demonstrator shows how flexible OLED technology can change our lives, in this case potentially making driving safer and more user friendly. The Lyteus line exists to help innovative ideas like this get to market faster in areas such as automotive, aerospace and health. We offer large-scale pilot production of bendable OLEDs in any shape and color, transparent or reflective, and with a uniformity that surpasses any other light source,” says Erno Langendijk, Program Manager at Holst Centre, one of the Lyteus coordinating partners.

The Lyteus automotive HUD demonstrator will be on show within the I-Zone at the Society for Information Display’s (SID’s) Display Week 2018 in Los Angeles, May 22-24.

A roll of light: Rehau participates in EU-funded lighting project

Polymer specialist REHAU and 13 partners are investigating OLED lighting technology, an innovative new lighting technology, which allows for lighting to be uniform, bendable, ultra-thin and transparent. REHAU’s involvement is part of the European programme called Lyteus, which is establishing a pilot line enabling companies of any size to develop concepts related to flexible OLED lighting technology quickly and cost-effectively and to bring products to market maturity. REHAU’s role in the consortium is to validate the pilot line as a launching customer, along with AUDI AG, Pilkington and emde design. The research activities are supported by the European Commission through the Photonics Public-Private Partnership with a total of 14 million Euro.

“In this project, REHAU is venturing into the market of printed electronics. With our know-how in the processing of polymer materials, we are trying to integrate OLED films into edgebands and profiles,” explains Dr.-Ing. Constanze Ranfeld, Corporate Research & Development / Advanced Technologies at REHAU. If the project is successful, these profiles could light up aircraft cabins, for example, as a design highlight. Moreover, the advanced, film-based and therefore flexible OLEDs could be used for numerous other application areas. The polymer specialist can also see possible applications in the automotive sector. REHAU demonstrates the new design freedom, which OLED lighting brings, in its technology carrier Smart Backend. On the rear of the vehicle, the films have been integrated into the lights in a spiral and thus created a unique optical effect. The integration of OLEDs into REHAU products fits perfectly with the strategic direction of REHAU. The aim of the company is continuous development. The polymer specialist invests in innovative technologies, in order to be able to supply high-quality and high-tech products to its customers.

There are however, commercialisation obstacles, which must be overcome before the technology reaches the mass market. Two of which are price intensity and limited availability: “OLEDs could become the lights of the future. Initially, however, technology scale up and commercial price points must be achieved,” Ranfeld emphasises. Lyteus is helping companies such as REHAU to bridge this gap. Integration into windows would also be conceivable. “Panes of glass that are transparent in the daytime and light up the room in the evening are visions for the future, though,” the developer explains.

Polymer specialist REHAU makes sustainable contributions to the ecological and economic challenges of tomorrow. Over 20,000 highly qualified employees all over the world are committed to this. For 70 years, outstanding innovations, the latest production technologies and flexible logistics have made the independent family company a forward-looking and reliable partner with expertise for almost all economic sectors. Focal topics are mobility, energy-efficient construction, digital transformation, future living and water management.

Whether here in the automotive field, in the aviation industry or in the furniture sector: Polymer specialist REHAU can see many possible applications for the OLED technology. (Photo: REHAU)

March: Lyteus at LOPEC, Munich (D)

Lyteus will be present at the LOPEC trade fair

Date: March 13-15, 2018
Venue: Munich Convention Center (D)
LOPEC is the leading event for printed electronics: research, development, and applications.

LOPEC (Large-area, Organic & Printed Electronics Convention) is the leading trade fair and the most important congress for the printed electronics industry.  It is the leading global platform in the industry and provides support in every aspect of the industry, from application to research. It connects, inspires and puts ideas into practice. For today and tomorrow. This is the place where printed electronics come to li

February: Lyteus at LED expo, ‘s-Hertogenbosch (NL)

Lyteus will be present at the LED expo

Date: 7-8 Febuary 2018
Venue: Brabanthallen, ‘s-Hertogenbosch (NL)
Theme: Smart Lighting

LED lighting is changing this world in a revolutionary way by offering cost-effective, better and controllable lighting. But the second LED revolution is coming. LED products will not resemble incandescent lamps, instead of accessorizing spaces, they’ll be integrated within them. The addition of sensors, microcontrollers, Bluetooth, Li-Fi will create connected lighting systems which are able to understand who’s within a space, what they’re doing and which will facilitate fast internet connections. Human Centric Lighting, artificial skies and contextually aware spaces will possibly become new standards. Designers will be able to explore new horizons through the miniaturization of light sources. Smart Lighting & Design – LED Expo offers a clear overview of the extreme dynamic lighting market.